對於 Arria II GX，ALTGXB 超級功能的世代可能會失效

如果您嘗試從 aLTGXB 產生超級功能 使用 qmegawiz 的命令列 -無聲生成因訊息而失效 類似下列內容：

Error: The GXB PLL 'CMU' parameter 'input_clock_frequency' is set to an illegal value of '155.52 MHz'. The value is illegal when the device speed grade is '4', the parameter 'base_data_rate' is set to '2967.0 Mbps', and the parameter 'Pll Type' is set to 'CMU' on atom 'test_alt4gxb_t3t6:test_alt4gxb_t3t6_component|tx_pll_alt0'

Error: The 'GXB PLL' parameter 'm' is set to an illegal value of '1'. The reference clock frequency to the PLL PFD (phase-frequency detector), which is input_clock_frequency ('155.52 MHz') \ n ('1'), must be the same as the feedback frequency to the PLL PFD, which is base_data_rate ('2967.0 Mbps') \ 2 \ m on atom 'test_alt4gxb_t3t6:test_alt4gxb_t3t6_component|tx_pll_alt0'

Error: The 'GXB PLL' parameter 'n' is set to an illegal value of '1' on atom 'test_alt4gxb_t3t6:test_alt4gxb_t3t6_component|tx_pll_alt0'. The value of n is restricted based on the min and max reference clocks to the PLL PFD (phase-frequency detector) for the speed grade of 4 and the specific Pll Type of 'CMU'. For non-basic protocol configurations, the value of N is fixed.

使用 MegaWi外掛程式管理器 GUI 來配置和產生 您的 ALTGXB 超級功能。