Ethernet Port Configuration Tool - ESX*

19439
10/16/2026

簡介

Download for Ethernet Port Configuration Tool - ESX*

可用的下載項目

  • VMware*
  • 大小：2.8 MB
  • SHA512：664fff7b9038831bc494211bf2f3235a3ddcd8681784023025176ef1eb9cb53c1b83f5578c593be2f7bf94406791395762b1e1af0f64d0f5450a4456ccdc08b8

詳細說明

Overview 

The Ethernet Port Configuration Tool (EPCT) is a command line utility that allows users to change the link type of a device. The supported types are defined within the adapter's NVM. This utility displays only the devices that potentially support reconfiguration.

 

NOTE:

  • A reboot is required to apply configuration changes.
  • You may lose link if you change the link type of your device from any port option that contains three to seven ports to a port option that enables multi-lane interfaces, such as 2x100Gbps, 2x50Gbps, or 1x100Gbps. One of the following methods may resolve the issue:
    • Use the utility to change the port option to 8x10Gbps; reboot your system; change to your originally desired configuration.
    • Completely power cycle your system.
  • If the tool displays an error such as "Access error" or "Cannot initialize port," you may be using an outdated driver. Please download the latest driver from https://support.intel.com and try again.

 

Supported operating systems

  • Microsoft Windows Server*
  • Linux* Kernel
  • Red Hat* Enterprise Linux*
  • SUSE* Linux Enterprise Server
  • Canonical Ubuntu*
  • Debian*
  • openEuler* for AArch64 (only on Intel® Ethernet E810 Series)
  • UEFI
  • UEFI ARM 2.3, 2.4, 2.6, 2.7, 2.8, 2.9
  • VMware* ESXi*
  • FreeBSD*

Note:  On systems running Linux, FreeBSD, Solaris, or ESXi, the base driver must be present for EPCT to function correctly.

免責聲明1

產品與效能資訊

1

Intel 正在從我們目前的文件、使用者介面和代碼中移除非包容性語言。請注意， 追溯性變更不一定可行，且部分非包容性語言可能會保留在較舊的文件、使用者介面和代碼中。

這個頁面的內容綜合了英文原始內容的人工翻譯譯文與機器翻譯譯文。本內容是基於一般資訊目的，方便您參考而提供，不應視同完整或準確的內容。如果這個頁面的英文版與譯文之間發生任何牴觸，將受英文版規範及管轄。 查看這個頁面的英文版。